TEC-150 HD is the most powerful collaring machine for Schedule 40 pipes. You can make collars on tubes with wall thickness up to 0.5”. Maximum collar size is Ø 6” on 16” run tubes on Schedule 40 pipes on standard machine.
Entire process from pilot hole milling to a complete, beveled branch can be performed in a single workstation.
Technical Information
Capacity Chart for Maximum Run Tube Wall Thickness in mm and inch
TEC-150 SCH40 capacity table is only for the tool strength. It does not indicate anything about:
- collar quality
- wall thinning
- ability of material to withstand collaring
Note! In 1:1 cases, please contact T-DRILL Sales.
| TEC-150 HD |
Value |
| Operating voltage |
200-240 V / 50 Hz /60 Hz, 3-phase
400-480 V / 50 Hz /60 Hz, 3-phase |
| Collar diameter |
1/2" – 6’’ IPS
|
| Run tube diameter |
1" – 20’’ IPS |
| Max wall thickness |
See the capacity table |
| Spindle speed of the elliptic pilot hole cutter |
300 rpm |
| Min. pilot hole |
Ø0.433 |
| Max. pilot hole |
5.67'' x 4.80''
|
| Material suitable for collaring |
Iron, Stainless steel, Aluminium, Copper, Copper-Nickel |
| Compressed air supply |
87 psi
|
| Compressed air consumption |
13.2 gal/min |
| Connected power |
6 kW |
| Fuse sizes |
3 x 63 (max) |
| Machine dimensions |
66.0'' x 38.6'' x 72.8'' (LxWxH) |
| Weight |
2200 lbs |
| Noise level |
Max. 85 dB |
Note! The values above are intended as a guide only.
Layout Drawing
